Dell PowerApp2 series Manuel d'installation - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dell PowerApp2 series. Dell PowerApp2 series 26 pages. Dell poweredge 2650: installation guide
Imprimer la pagesupport.dell.com
2.
Mark the rack's front vertical rails with a felt-tipped marker or place self-adhesive
masking tape where the system's upper and lower edges will be located (see
Figure 1-7).
3.
Make a mark or place tape on the vertical rails next to the template's V-shaped
notches.
2 U (3.5 inches) between
slide assemblies
(drawing is not to scale)
template
Figure 1-7. Using Template to Mark Vertical Rails
4.
At the front of the rack cabinet, position one of the slide assemblies so that its
mounting bracket flange fits between the marks or tape you placed on the rack,
marking the upper and lower edges of the template (see Figure 1-8).
The hooks on the mounting bracket should align with the marks you made from
the V-shaped notches in the template.
5.
Align the slide-assembly mounting-bracket flange (on the front of the slide
assembly) with the square holes in the front vertical rail (see Figure 1-8).
6.
Push forward until the mounting tabs are secure in the square holes on the
vertical rail and the push-button clicks and pops out.
7 .
Push back on the back slide assembly mounting bracket flange until the mounting
tabs lock into the square holes on the back vertical rail.
Rack Installation Guide
1-9