Dell PowerEdge 2550 Instructions pour l'installation du rack - Page 26

Parcourez en ligne ou téléchargez le pdf Instructions pour l'installation du rack pour {nom_de_la_catégorie} Dell PowerEdge 2550. Dell PowerEdge 2550 40 pages. Wake-on-lan (wol) support on dell servers
Également pour Dell PowerEdge 2550 : Manuel d'installation (26 pages), Manuel d'installation (32 pages), Manuel de configuration (10 pages), Manuel d'activation (32 pages), Manuel d'installation (32 pages), Manuel (28 pages), Manuel (15 pages)

Installing the Cable Management Arm

Facing the back of the two-post rack, locate the two slots and the threaded hole on the

back right side of the system.

Insert the bracket on the end of the cable management arm to the mating slots and

threaded hole, and secure the arm using the captive thumbscrew.

F i g u r e 1 - 1 6 . I n s t a l l i n g t h e C a b l e M a n a g e m e n t A r m

Align the free end of the cable-management arm (the end with the half-hinge) to the

hinge-half mate on the back-right side (as viewed from the back) of the system

(see Figure 1-16).

Squeeze the quick-disconnect knobs on the free end of the cable-management arm

and align the two hinge halves to attach the arm to the bracket on the back of the

system chassis (see Figure 1-16).

Attach the input/output (I/O) cables to their respective expansion cards on the back of

the system.

1-20

Rac k I n st allat io n G uide

quick-disconnect knobs

captive

thumbscrew