Dell PowerEdge 6400 Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Dell PowerEdge 6400. Dell PowerEdge 6400 10 pages. Wake-on-lan (wol) support on dell servers
Également pour Dell PowerEdge 6400 : Installation du rack (37 pages), Manuel d'installation de la mise à niveau (42 pages), Installation du rack (34 pages), Manuel d'installation (42 pages), Manuel d'installation (37 pages), Installation (4 pages), Assemblage et installation (32 pages), Manuel (10 pages), Manuel (15 pages)

SCSI Backplane Option

7 .

Disconnect the flat data cable from the locking connector on the backplane

board.

Disconnect the power cable labeled "HD-B/P" from the power connector on the

backplane board.

To release the connector, press the latch on the side of the connector.

Disconnect the fan power cable from the power connector labeled "FAN" on the

backplane board.

To release the connector, press the latch on the side of the connector.

10. Loosen the captive thumbscrew on the backplane board.

11. Slide the SCSI backplane board away from the chassis inner wall approximately

1 centimeter (cm) (a quarter inch), and then lift the board off of the L-shaped

mounting tabs and away from the chassis (see Figure 1).

Thumbscrew

SCSI backplane board