Craden DP9 Manuel du service d'assistance - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel du service d'assistance pour {nom_de_la_catégorie} Craden DP9. Craden DP9 19 pages. Transaction printers
Également pour Craden DP9 : Manuel technique (8 pages), Manuel d'installation (2 pages), Manuel de l'utilisateur (18 pages)

Imprimer la page

RIBBON SHIELD REMOVAL – REINSTALLATION

Open the cabinet, center the carriage and pull the

lifter ring out and down to raise the carriage. Remove

the ribbon cartridge.

Tabs

Pull the ribbon guide plate tabs toward you.

Insert the new shield tips into the gap

between the ribbon guide plate and the

carriage

Push the shield up until it stops.

Install the ribbon cartridge and

lower the carriage.

Watch the video at

www.craden.com/ribbonshield.wmv

Lifter

Ring

Carriage

Ribbon

Guide Plate

Shield

Tips

Carriage

Shaft

Lift the carriage shaft with one hand and

pull the shield down and out to the right

with the other.

Rotate the shield until it is centered on

the carriage. Do not let the shield tips

slip behind the carriage.

Move the carriage lifter ring up and in to lower

the carriage. Close the cabinet turn the printer

on and do a test print or transaction.