Dell Precision Workstation 350 Manuel d'installation - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dell Precision Workstation 350. Dell Precision Workstation 350 32 pages. Dell poweredge 350 servers: supplementary guide
Également pour Dell Precision Workstation 350 : Information Update (30 pages)

Dell Precision Workstation 350 Manuel d'installation
support.dell.com

Marking the Rack

1.
Determine where you want to place the bottom of the system.
CAUTION: If you are installing more than one system, install the first sys-
tem in the lowest available position in the rack.
2.
Place the 1-U template over the front of the two-posts of the rack in the desired
location.
3.
Position the bottom of the template in line with the desired bottom position of
the system chassis.
4.
Mark the upper and lower-mounting positions on the vertical rails as shown by
the V-notches on the sides of the template.
Each 1-U (1.75-inch) vertical space has three holes, with center-to-center spacing
between holes (beginning at the center of the top hole of a 1-U space) of 0.625,
0.625, and 0.5 inch (see Figure 1-5).
1.75 inches (1 U)

Figure 1-5. Two-Post Open-Frame Relay Rack 1-U Hole Spacing

0.5 inch
0.625 inch
0.625 inch
0.5 inch
Rack Installation Guide
1-7