Dell studio XPS Manuel - Page 24

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Dell studio XPS. Dell studio XPS 38 pages. Re-image "how-to" guide
Également pour Dell studio XPS : Manuel d'information sur les produits (2 pages), Mise en place (2 pages), Manuel de configuration (2 pages), Manuel d'information (2 pages), Manuel de démarrage rapide (2 pages), Information des consommateurs (29 pages), Mise en place (2 pages)

Documentation

NOTE:

It is recommended that only a technically knowledgeable person perform this

procedure.

CAUTION:

The processor can get very hot during normal operation. Ensure that the processor has had

sufficient time to cool before you touch it.

1. Follow the instructions in

Open the computer cover.

Remove the processor airflow

4. Remove the processor heat sink:

a. Remove the retention module clip by pressing in on the tab and lifting the retention module clip up.

b. Pull the release lever out until the heat sink is released.

c. Lift the heat sink away from the processor.

NOTICE:

Lay the heat sink down with the thermal grease facing

upward.

NOTICE:

If you are installing a processor upgrade kit from Dell, discard the original heat sink. If you are not installing

a processor upgrade kit from Dell, reuse the original heat sink when you install your new processor.

5. Pull the release lever straight up until the processor is released.

http://support.dell.com/support/edocs/systems/dimxpsg2/en/SM/parts.htm (24 of 37) [3/26/2008 3:57:09 PM]

"Before You

Begin."

shroud.