Dell XPS 13 7390 2-in-1 Manuel d'entretien - Page 20
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Dell XPS 13 7390 2-in-1. Dell XPS 13 7390 2-in-1 49 pages.
Également pour Dell XPS 13 7390 2-in-1 : Configuration et spécifications (22 pages), Manuel de démarrage rapide (18 pages)
Imprimer la page
5. Connect the display cable and camera cable to the system board.
6. Adhere the tapes that secure the display cable and camera cable to the system board.
7. Align and place the display-cable bracket on the system board.
8. Tighten the captive screw (M1.6x3) that secures the display-cable bracket to the system board.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
About this task
The following image indicates the location of speakers and provides a visual representation of the removal procedure.
Steps
1. Disconnect the speaker cable from the system board.
2. Note the routing of the speaker cable and remove the speaker cable from the routing guides on the palm-rest assembly.
3. Using a plastic scribe, pry the speakers off the palm-rest assembly.
20
Removing and installing components
After working inside your
computer.
Before working inside your
computer.