Dell 540 - USB Photo Printer 540 Manuel d'entretien - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Dell 540 - USB Photo Printer 540. Dell 540 - USB Photo Printer 540 37 pages. Dell™ photo printer 540 user's guide
Également pour Dell 540 - USB Photo Printer 540 : Spécifications (2 pages), Manuel de l'utilisateur (43 pages)
Imprimer la page
12. Replace the front panel (see
13. Replace the computer cover (see
14. Connect your computer and devices to their electrical outlets, and turn them on.
NOTE:
If you installed a new drive, see the documentation that came with the drive for instructions on installing any software required for drive
operation.
Replacing the FlexDock
1. Follow the procedures in
Before You
2. Remove the computer cover (see
3. Remove the front panel (see
1
custom screws (2)
3
FlexDock USB cable
4. Disconnect the FlexDock USB cable from the back of the FlexDock and from the internal USB connector (F_USB1) on the system board (see
Components).
5. Remove the two screws securing the FlexDock.
6. Slide the FlexDock out through the front of the computer.
7. If you are not replacing the FlexDock, replace the drive panel insert (see
8. If you are installing a new FlexDock:
a. Remove the drive panel insert, if applicable (see
b. Remove the FlexDock from its packaging.
9. Gently slide the FlexDock into place in the FlexDock slot.
10. Align the screw holes in the FlexDock with the screw holes in the FlexDock.
11. Replace the two screws that secure the FlexDock.
NOTE:
Ensure that the FlexDock is installed before the FlexDock cable is connected.
12. Connect the FlexDock USB cable to the back of the FlexDock and to the internal USB connector (F_USB1) on the system board (see
Components).
Replacing the Front
Panel).
Replacing the Computer
Cover).
Begin.
Replacing the Computer
Cover).
Replacing the Front
Panel).
2
F_USB1 connector
4
FlexDock
Replacing the Drive Panel
Replacing the Drive Panel
Insert).
Insert).
System Board
System Board