Dell D11S Manuel de configuration et de spécifications - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel de configuration et de spécifications pour {nom_de_la_catégorie} Dell D11S. Dell D11S 35 pages. Small form factor
Également pour Dell D11S : Manuel de démarrage rapide (2 pages), Configuration et spécifications (35 pages), Manuel du propriétaire (45 pages), Manuel d'installation (22 pages), Configuration et spécifications (37 pages), Manuel de configuration et de spécifications (31 pages)

Imprimer la page
Dell D11S Manuel de configuration et de spécifications
Option
Serial Port
SATA Operation
Drives
Smart Reporting
USB Configuration
Front USB Configuration
Rear USB Configuration
USB PowerShare
Audio
Dust Filter Maintenance
20
System setup
Description
NOTE:
Depending on the computer and its installed devices, the items listed in this section
may or may not appear.
Determines how the built-in serial port operates.
Choose any one option:
•
Disabled
•
COM1 (selected by default)
•
COM2
•
COM3
•
COM4
Allows you to configure the operating mode of the integrated hard drive controller.
•
Disabled = The SATA controllers are hidden
•
AHCI = SATA is configured for AHCI mode
•
RAID ON = SATA is configured to support RAID mode (selected by default)
Allows you to enable or disable the various drives on-board:
•
SATA-0 (enabled by default)
•
SATA-2 (enabled by default)
•
SATA-3 (enabled by default)
•
SATA-4 (enabled by default)
•
M.2 PCIe SSD-0 (enabled by default)
This field controls whether hard drive errors for integrated drives are reported during system startup.
The Enable Smart Reporting option is disabled by default.
Allows you to enable or disable the integrated USB controller for:
•
Enable USB Boot Support
•
Enable Front USB Ports
•
Enable Rear USB Ports
All the options are enabled by default.
Allows you to enable or disable the front USB ports. All the ports are enabled by default.
Allows you to enable or disable the back USB ports. All the ports are enabled by default.
This option allows you to charge the external devices, such as mobile phones, music player. This
option is disabled by default.
Allows you to enable or disable the integrated audio controller. The option Enable Audio is selected by
default.
•
Enable Microphone
•
Enable Internal Speaker
Both the options are selected by default.
Allows you to enable or disable BIOS messages for maintaining the optional dust filter installed in your
computer. BIOS will generate a pre-boot reminder to clean or replace the dust filter based on the
interval set. The option Disabled is selected by default.
•
Disabled
•
15 days
•
30 days