DH electronics XLON USB Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DH electronics XLON USB. DH electronics XLON USB 2 pages.

Imprimer la page

Hardware installation

• Connect the
6 adapter to a free USB port, using
2
1
3
the supplied USB-cable
Note that you don't have to shut down your PC.
1
2
3
4
No.
Term
1
®
LON
network
connector
2
LED green „STATE"
3
LED yellow „SVC"
4
Service Pin Button
5
USB connector
You will find more detailed informations in the comprehen-
sive User's Guide.
- 2 -
5
Remark
2-pin: FTT-10A
RJ45: RS485 Pin1: 485_A
Pin2: 485_B
Pin4: GND
Off: Not ready to operate
On: Ready to operate
Display Service Pin Neuron
processor
Manual release of a Service
Pin message
Please use supplied USB-cable

Software installation

Windows 98 / ME / 2000 / XP:
• Start the computer
• Make sure that you have administrator rights
• Connect the
6 adapter to a free USB port, using
3
2
1
the supplied USB-cable
Windows recognizes the new hardware and will start the
driver installation wizard.
• Insert the driver disk/CD
• Follow the instructions on the screen
Other operating systems:
You will find more detailed informations in the comprehen-
sive User's Guide.
After installation you have access to the
under the device name XLON USB n (n = device number).
Driver update
The newest drivers can be downloaded from:
http://www.xlon.de
Windows 98 / ME / 2000 / XP:
• Start the device manager (system control panel - system -
hardware)
• Under „XLON LonTalk adapter" select the
adapter
• Open the "Properties" window
• Click on the tab "Driver"
• Click on the button "Update Driver ..."
• Follow the instructions on the screen
Other operating systems:
You will find more detailed informations in the comprehen-
sive User's Guide.
- 3 -
6 adapter
3
2
1
3
2
1
6