Dell Dimension 5100C Manuel d'entretien - Page 31
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Dell Dimension 5100C. Dell Dimension 5100C 47 pages. Dell desktop computer quick reference guide
Également pour Dell Dimension 5100C : Mise en place (2 pages)
Imprimer la page
Replacing the Battery
1. Record all the screens in
system setup
2. Follow the procedures in
"Before You
3. Remove the
computer
cover.
4. Remove the
hard
drive.
5. Locate the battery socket (see
NOTICE:
If you pry the battery out of its socket with a blunt object, be careful not to touch the system board with the object. Ensure that the object is
inserted between the battery and the socket before you attempt to pry out the battery. Otherwise, you may damage the system board by prying off
the socket or by breaking circuit traces on the system board.
6. Remove the battery:
a. Support the battery connector by pressing down firmly on the positive side of the connector.
b. While supporting the battery connector, press the battery toward the positive side of the connector and pry it up out of the securing tabs on the
negative side of the connector.
NOTICE:
To avoid damage to the battery connector, you must firmly support the connector while installing or removing a battery.
7. Install the new system battery.
a. Support the battery connector by pressing down firmly on the positive side of the connector.
b. Hold the battery with the "+" facing up, and slide it under the securing tabs on the positive side of the connector.
c. Press the battery straight down into the connector until it snaps into place.
8. Replace the
hard
drive.
9. Replace the
computer
cover.
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.
10. Connect your computer and devices to electrical outlets, and turn them on.
11. Enter
system setup
and restore the settings you recorded in step 1.
12. Properly dispose of the old battery. See the Product Information Guide for battery disposal information.
Back to Contents Page
so that you can restore the correct settings in step 11.
Begin."
"System Board
Components").