ENSOTECH SWAVE-E2 Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} ENSOTECH SWAVE-E2. ENSOTECH SWAVE-E2 11 pages. Electronic speed controller
Également pour ENSOTECH SWAVE-E2 : Manuel de l'utilisateur (11 pages)

Imprimer la page

Cable (UARTLINK) connection

Connect Android Device to the ESC by the programming cable. If the green LED on the UARTLINK is off, please,

check the Android device USB connection. One should note that some new Android devices utilize Type-C micro

USB. Always use high quality Type-C connectors with OTG data transfer features. Beware that some cheap adaptors

in the market have bad or even do not feature with OTG connection.

Connect the battery and switch on the ESC, your Android device will

automatically detect the USB device and ask you to choose an app for it.

Otherwise, you can launch the app manually and connect it by context menu at

the right corner of the APP.

If the device is connected successfully, the color of the application icon will

change to BLUE, if it remains GREY, please, try to unplug and plug again the

USB into your Android device and wait 2 second for your android device

response. If the icon still remains grey, please, recheck all your connections.

Connection require the phones / tabs support the latest OTG. Ensotech try to

have the most compatibility but we are not guarantee and not responsible to

support every devices.

If your device uses TYPE-C USB, please make sure to use an adaptor has OTG

feature. If you are uncertain please do not open the package. Consults with

your sellers and other users their advice for supported model.