Dell Inspiron 546s Manuel d'entretien - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Dell Inspiron 546s. Dell Inspiron 546s 50 pages. Service manual

Imprimer la page

3. Remove the support bracket (see

4. Prepare the card for installation.

See the documentation that came with the card for information on configuring the card, making internal connections, or otherwise customizing it for your

computer.

5. If you are installing the PCI Express card into the x16 card connector, position the card so the securing slot is aligned with the securing tab.

1 PCI Express x16 card

2 PCI Express x16 card slot 3 securing tab

4 PCI Express x1 card slot 5 PCI Express x1 card

6. Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot.

1 fully-seated card

2 not fully-seated card

3 bracket within slot 4 bracket caught outside of slot

7. Replace the support bracket (see

8. Connect any cables that should be attached to the card.

See the documentation for the card for information about the card's cable connections.

CAUTION:

Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly

or cause damage to the equipment.

9. Replace the computer cover (see

10. Reconnect the computer and devices to electrical outlets, and then turn them on.

11. To complete the installation, see

Configuring Your Computer After Removing or Installing a PCI/PCI Express Card

NOTE:

For information on location of external connectors, see the Setup Guide. For information on installing drivers and software for your card, see the

documentation that shipped with the card.

Installed

Sound

1. Enter system setup (see

Removing the Support

Bracket).

Replacing the Support

Bracket).

Replacing the Computer

Cover).

Configuring Your Computer After Removing or Installing a PCI/PCI Express

Removed

1. Enter system setup (see

Card.