2Wire i38HG Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} 2Wire i38HG. 2Wire i38HG 20 pages.

Imprimer la page
iNID -- i3812V User Guide
Table 3: i3812V Outside Unit Indicators Status
Indicators
Description
POWER
The
green within two minutes of power application.
•
•
•
VDSL 1 and VDSL 2
These two indicators flash after 60 seconds of power application for 1 to 2
minutes and cycle three times.
•
•
•
•
Note:
indicators, whichever is in the "best" state.
DATA
•
•
•
COAX
•
•
•
LINE 1 and LINE 2
•
•
Note:
6
indicator turns red when the power is first applied, and changes to
POWER
Constant green indicates that power is on and initialization has been
completed successfully.
Flashing green indicates that the iNID is booting.
Red indicates that a Power-On Self-Test (POST) failure (unbootable) or another
malfunction (for example, alarm) has occurred during self initialization.
Solid green indicates that the broadband connection is trained.
Flashing green indicates that the broadband connection is being attempted
(DSL attempting to synchronize).
Alternating flashing green and steady red indicate that the broadband
connection fails to establish for more than three consecutive minutes. This
pattern continues until the broadband connection is successfully established.
Flashing red indicates that there is no DSL signal on the line.
The
indicator on the i38HG mirrors one or both of the VDSL
BROADBAND
Solid green indicates that a device is connected (such as i38HG).
Flickering green indicates that there is inbound activity associated with the
data port (that is, the green LINE 1 connection). The flickering of the light is
synchronized to the actual data traffic.
Red indicates that a device failed to be authenticated or successfully
connected.
Solid green indicates that a device is connected (such as a Set Top Box).
Flickering green indicates that there is inbound activity associated with the
COAX port. The flickering of the light is synchronized to the actual data traffic.
Red indicates that a device failed to be authenticated or successfully
connected.
Solid green indicates that the associated VoIP line has been registered with
the network and ready for use.
Flashing green indicates that a telephone is in use on the associated VoIP
line.
These two indicators mirror
and
indicators on the i38HG.
LINE 1
LINE 2