Dell XPS 430 Manuel d'entretien - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Dell XPS 430. Dell XPS 430 42 pages. Dell xps computer setup
Également pour Dell XPS 430 : Mise en place (2 pages)
Imprimer la page
NOTICE:
Ensure that you release the securing tab to seat the card. If the card is not installed correctly, you may damage the system board.
10. Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot.
1 fully seated card
4 bracket caught outside of slot 5 alignment bar
11. Ensure that:
The tops of all cards and filler brackets are flush with the alignment bar.
l
The notch in the top of the card or filler bracket fits around the alignment guide.
l
12. If you removed a card retention bracket, snap it into place, securing the PCI Express card.
1 release tab 2 card retention bracket 3 card retention door
NOTICE:
Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or
cause damage to the equipment.
NOTICE:
To connect a network cable, first plug the cable into the network device and then plug the cable into the computer.
13. Replace the computer cover (see
14. Connect the computer and devices to electrical outlets, and then turn them on.
15. To complete the installation, see
Configuring Your Computer After Removing or Installing PCI and PCI Express Cards
NOTE:
For information on location of connectors, see the Quick Reference Guide. For information on installing drivers and software for your card, see the
documentation that shipped with the card.
Installed
Sound
1. Enter system setup (see
Card
System
Setup).
2. Go to Onboard Devices
and select Integrated
2 not fully seated card 3 bracket within slot
6 alignment guide
Replacing the Computer
Cover).
Configuring Your Computer After Removing or Installing PCI and PCI Express
Removed
1. Enter system setup (see
System
Setup).
2. Go to Onboard Devices
and select Integrated
Cards.