Dell Active Fabric Manager Manuel d'installation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dell Active Fabric Manager. Dell Active Fabric Manager 19 pages. Active fabric manager installation guide 1.5
Également pour Dell Active Fabric Manager : Manuel d'installation (44 pages)

Imprimer la page

Software Requirements

Table 3. Software Requirements for Linux CentOS

Software

Notes

Linux CentOS 5.7

Linux CentOS requires administrator permission on the target server. Make sure that you have

and 5.8

permission on the network service account to modify the system temp directory. For Linux

CentOS, the temp directory is temp /tmp.

Internet Explorer 9

Chrome 18 and

higher

Firefox 12 and 13

Table 4. Software Requirements for Windows 7

Software

Notes

Windows 7

Windows requires administrator permission on the target server. Make sure that you have

permission on the network service account to modify the system temp directory. For Windows,

the temp directory is (%systemroot%\temp)

Internet Explorer 9

Chrome 18 and

higher

Firefox 12 and 13

Prerequisites

Before you begin, gather the following information:

•

Telnet credentials.

•

Syslog IP address–Use this address to store the syslog messages.

•

TFTP server address–Use this address to load the Dell Force10 operating software (FTOS) software images and

configuration files during bare metal provisioning (BMP).

•

Password for DFM superuser.

•

Simple network management protocol (SNMP) read and write community strings.