Dell Dimension 2200 Manuel - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Dell Dimension 2200. Dell Dimension 2200 50 pages. Vga card installation instructions
Également pour Dell Dimension 2200 : Manuel de remplacement (9 pages), Instructions d'installation (1 pages)

Imprimer la page
Dell Dimension 2200 Manuel
5.  While facing the front of the computer, press in the front-panel release tab at the top of the computer.
 
6.  Swing the front panel away from the computer, disengage the two retaining hooks at the bottom of the front panel, and carefully pull it away from the
computer.
7.  To replace the front panel, fit the two front-panel retaining hooks into their corresponding slots on the computer frame. Rotate the front panel toward
the computer until the front panel latches into position.
3.5-Inch Front-Panel Insert
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
1.
 Shut down the
computer.
2.  Turn off any attached devices and disconnect them from their electrical outlets.
NOTICE:
To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack.
3.  Disconnect the computer power cable from the wall outlet, and then press the power button to ground the system board.
4.
 Remove the computer
cover.
5.
 Remove the front
panel.
6.  From the back of the front panel, press the release tab to the side.
 
"Safety
Instructions."