Dell DX6000 Vue d'ensemble - Page 18

Parcourez en ligne ou téléchargez le pdf Vue d'ensemble pour {nom_de_la_catégorie} Dell DX6000. Dell DX6000 19 pages. Rack installation instructions — static rails
Également pour Dell DX6000 : Manuel complémentaire (4 pages), Instructions pour l'installation du matériel (2 pages), Manuel de l'utilisateur (46 pages), Manuel d'installation et de configuration (43 pages), Manuel d'installation et de configuration (35 pages), Manuel de démarrage (28 pages), Avis (28 pages), Avis (20 pages), Manuel de configuration (9 pages), Manuel de configuration (9 pages), Note de mise à jour (8 pages), Manuel de référence (12 pages), Manuel de configuration (7 pages), Note de mise à jour (6 pages), Note de mise à jour (5 pages), Notes de mise à jour (5 pages), Instructions d'installation (2 pages), Instructions d'installation (2 pages)

Imprimer la page
Dell DX6000 Vue d'ensemble
#
# PARAMETERS
#
[proxy]
port = 80
interface = 192.168.1.1
validationMode = False
[log]
#<10 = CHATTER, which includes twisted.internet logs
#10 = DEBUG - Turns on detail message handling logs
#20 = INFO - Turns on request and response echo and connection pool logging
#40 = ERROR - Turns on error logging
level = 40
#default = localhost
#For stdout, leave blank.
host = localhost
#default = 514. Not used for empty host.
port = 514
#default = stdout. Not used if host is not empty.
file = stdout
#If loghost is empty and file is not stdout, this is the log file size
#limit
fileSize = 0
#If host is empty, this is not used. If host is not empty
#then hostBindInterface should be the host that will
#be written with log messages.
hostBindInterface = 'localhost'
facility = 0
[connectionPool]
maxStoredConnections = 200
connectTimeOut = 60
poolTimeOut = 300
[scsp]
hosts = 192.168.1.121 192.168.1.122 192.168.1.123
#name of the DX Storage cluster. This is the cluster we will dns browse for nodes
clusterName =
port = 80
[remote]
hostsConfigFile = /etc/caringo/scspproxy/hosts.cfg
#
# END

3.2. hosts.cfg

Communication with remote proxies or clusters is configured in a configuration file called hosts.cfg
that is installed by default in the /etc/caringo/scspproxy directory. The hosts.cfg file contains a list of
all known remote clusters, each configured with the following 5 values on a single line per cluster:
Option Name
ClusterName

Copyright © 2010 Caringo, Inc.

All rights reserved
Description
The common name for a remote cluster that
will be used in requests sent to the proxy. May
not contain whitespaces and cannot be a 32-
15
Version 1.2
December 2010