DH Lifelabs CAHP-180WH10Pro Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} DH Lifelabs CAHP-180WH10Pro. DH Lifelabs CAHP-180WH10Pro 9 pages.

Imprimer la page

Getting Started

Unlock by the key

Remove all protective

and open the door.

plastic from the HEPA

and activated carbon

filters, then reinstall.

Connectivity

Sciaire Pro + HEPA can connect with your smartphone

when you download the DH Lifelabs App. Follow the

steps in the app or steps below.

DH Lifelabs App

1. Download the DH Lifelabs and enable Bluetooth and Network settings.

2. Turn on the Sciaire Pro + HEPA.

3. Open DH Lifelabs app and click "+" to connect the device.

4. When the app indicates, press and hold the Wi-Fi Indicator for 3 seconds.

5. The app should connect to the device over your Wi-Fi network and the Wi-Fi

Indicator will illuminate amber. To disconnect from the network, press the Wi-Fi

Status Indicator/Button. The unit will beep and the indicator will flash red.

Close the door. Plug

in and press the power

button to turn on.

GET IT ON

Control Panel

On/Off

Powers the unit on

and off

Auto Mode

Blue: Air Quality Good

Yellow: Air Quality Moderate

Red: Air Quality Poor

Fan Speed

(1/2/3) Three fan speeds

Safety Lock

Prevent misuse or

accidental touch

Air Quality Indicator

Good

Moderate

Timer (4H/8H/12H)

Set the timer to have the

device turn off automatically

Wi-Fi Indicator

Flashing amber: Attempting to connect

Steady amber: Connection successful

Steady red: Not connected

Connect/disconnect: Short press

Filter Replacement

Indicator & Reset

It will remind to change new filters

(1#2-in-1 HEPA filter, 2# Activated

Carbon Filter). Press for 3s to reset the

filter lifetime counting.

Poor