Dell EMC VxFlex Ready Node 14G Manuel de démarrage rapide - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Dell EMC VxFlex Ready Node 14G. Dell EMC VxFlex Ready Node 14G 22 pages.
Également pour Dell EMC VxFlex Ready Node 14G : Manuel d'inspection (8 pages)
Imprimer la page
Installing SDC on ESX with vSphere plug-in
a. Enter vCenter name or IP address, username, and password.
b. For Choose Mode, choose option 1, Register VxFlex OS plug-in.
c. Read the upgrade notice, and enter
d. For Registration, choose either Standard (simplified, using embedded
Tomcat), or Advanced (to use an external web server or previously installed
VxFlex OS gateway).
To use the advanced options, refer to the VxFlex OS Deployment Guide .
e. Accept the thumbprint (if required).
3. Load the plug-in by logging out, and then logging back in to the vSphere web
client.
4. Return to the PowerCLI window, and press ENTER to return to the script menu
and complete the plug-in installation.
5. Go to the Home tab and verify that the VxFlex OS icon is visible in the
Inventories section.
The plug-in is registered. If the VxFlex OS icon is missing, the vSphere web
client server failed to register the plug-in, due to one of the following reasons:
Connectivity problem between the vSphere web client server and the web
l
server storing the plug-in (for example, network / firewall etc.). Resolution:
Verify that there is communication between the vSphere web client server
and the web server storing the plug-in.
URL problem when using an external web server. Resolution: Verify that the
l
URL is https:// and is pointing to the correct web server IP address (VxFlex
OS Gateway).
Use the VxFlex OS vSphere plug-in to install the SDC on ESX servers and deploy a
VxFlex OS system.
Procedure
1. Prepare the ESXi hosts:
a. Log in to the vSphere web client.
b. Open the VxFlex OS screen by clicking the VxFlex OS icon.
c. From the Basic Tasks section of the VxFlex OS screen, click Pre-
Deployment Actions.
The Pre-Deployment Actions screen appears.
d. Drill-down on the vCenter to display connected ESXi hosts.
e. For every ESXi host that might be part of this VxFlex OS system (even if
only in the future):
a. Select Install SDC.
b. To configure DirectPath (optional), select Configure DirectPath. (This
step selects the Install SDC, too.)
c. Select Convert ISO.
d. Type ESXi Root Password.
Deploying VxFlex OS in a 2-Layer Environment
to continue.
y
Installing SDC on ESX with vSphere plug-in
13