Dell EMC VxFlex Series Manuel du propriétaire - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Dell EMC VxFlex Series. Dell EMC VxFlex Series 46 pages.
Imprimer la page
VxFlex appliance and VxFlex Ready Node R740xd system overview
Table 6 Back view features for the VxFlex Ready Node R740xd 4 x 2.5 inch drive system (continued)
Item
Ports, panels, or slots
2
Half-height PCIe expansion
card slot
3
Rear handle
4
Rear disk drive (4)
5
Power supply unit (2)
6
NIC ports
7
USB port (2)
8
VGA port
9
Serial port
10
iDRAC9 dedicated port
11
System identification
button
Inside the system
Internal components that are hot swappable are marked orange and touch points on the components are marked blue.
CAUTION
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell EMC is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
R740xd Owner's Guide
14
Icon
Description
N/A
The PCIe expansion card slot (riser 2) connects one half-height
PCIe expansion cards to the system. For more information, see
Expansion bus specifications.
N/A
The rear handle can be removed to enable any external cabling of
PCIe cards that are installed in PCIe expansion card slot 6.
N/A
This system supports 4 x 2.5 inch drives in the back of the
appliance.
For more information, see
The NIC ports that are integrated on the network daughter card
(NDC) provide network connectivity. For more information about
the supported configurations, see
The USB ports are 9-pin and 3.0-compliant. These ports enable
you to connect USB devices to the system.
Enables you to connect a display device to the system. For more
information, see
Enables you to connect a serial device to the system. For more
information, see
Enables you to remotely access iDRAC. For more information, see
the Integrated Dell Remote Access Controller User's Guide at
www.dell.com/idracmanuals.
The System Identification (ID) button is available on the front and
back of the system. Press the system ID button to identify a
system in a rack. You can also use the system ID button to reset
iDRAC and access BIOS using step-through mode.
Technical specifications
Technical
Technical
specifications.
Technical
specifications.
specifications.