Dell Force10 S2410 Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Dell Force10 S2410. Dell Force10 S2410 42 pages. Installing the s2410 system
Également pour Dell Force10 S2410 : Manuel de démarrage rapide (31 pages)

Imprimer la page

1. Physical Interfaces

• At least one cable (included) to connect the power source to the S2410 AC power supply

• Brackets and screws (included) for front-mounted rack installation (#2 Phillips screwdriver required but

not included)

• Console port: Rollover cable (RJ-45 connector) and terminal adapter (DB-9 to RJ-45) (supplied) (For

pinout and terminal settings, see

Features

• 24 line-rate 10 GbE ports (See

• CPU and switch processor

• Flash memory

• Standard 1U chassis height by 19-inch rack-mountable width

• Several rack attachment options; front-mount brackets standard

• Seven built-in fans on the left side (see

• Load-sharing redundant internal AC power supplies

• Up to 16000 MAC address entries supported with hardware assisted aging

• Supports 9000 jumbo frames

• Back-pressure support at half-duplex, IEEE 802.3x flow control at full duplex

• Extensive LEDs for per-port and system statuses (see

Ports

S2410CP:

• 20 fixed 10GbE BaseCX4 ports

• 4 ports for optional 10G XFP transceivers (needs XFP optics)

• 1 RJ-45 console port with RS-232 signaling

• 1 RJ-45 10/100 dedicated Ethernet Management port (labeled 10/100 Ethernet)

S2410P:

• 24 fixed 10GbE XFP ports (needs XFP optics)

• 1 RJ-45 console port with RS-232 signaling

• 1 RJ-45 dedicated Ethernet Management port (labeled 10/100 Ethernet)

For details on using ports (console, CX4, Ethernet Management, and XFP), see

on page

23.

The S2410 System

Accessing the Console Port on page

Ports

for details.)

Fans and Airflow on page

23.)

12)

LED Displays on page

Chapter , Accessing Ports,