Dell PowerEdge 2400 Manuel d'activation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'activation pour {nom_de_la_catégorie} Dell PowerEdge 2400. Dell PowerEdge 2400 8 pages. Wake-on-lan (wol) support on dell servers
Également pour Dell PowerEdge 2400 : Manuel d'installation (20 pages), Manuel d'installation (8 pages), Instructions pour l'installation du rack (32 pages), Mise à jour (2 pages), Manuel d'installation (8 pages), Manuel de mise à jour (2 pages), Manuel (15 pages)

1-4

Dell PowerEdge 2400 Systems—Activating the Dell PowerEdge Expandable RAID Controller 2/Si

RAID hardware key

Latches (2)

Socket

Replace the cooling shroud and computer cover, and then reconnect the com-

puter and peripherals to their AC power sources and turn them on.

Press <F2> immediately after you see the following message:

<F2> = System Setup

If you wait too long and your operating system begins to load into memory, let

the system complete the load operation; then shut down the system and try

again.

For more information on the System Setup program, see "Using the System

Setup Program" in your system User's Guide.

NOTE: To ensure an orderly system shutdown, consult the documentation that

accompanied your operating system.

10. Press <Alt> <p> to switch to Page 2 of the System Setup screen.

11. If the Onboard RAID option is displayed, select this option.

If the Primary SCSI option is displayed, the integrated RAID controller was not

detected; go to step 1 and repeat all installation steps.