Cradlepoint AER 2100 Manuel de démarrage rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cradlepoint AER 2100. Cradlepoint AER 2100 6 pages. Aer2100 series temporary, pop-up & mobile branch networking
Également pour Cradlepoint AER 2100 : Fiche technique (8 pages), Manuel de démarrage rapide (6 pages)

Imprimer la page
Quick Start Guide
/
AER2100 Series
HARDWARE
2
LED Indicators
Power: The Cradlepoint AER2100 must be
powered using an approved 12V DC power source.
+ Green = Powered ON
+ No Light = Not receiving power. Check
the power switch and the power source
connection.
+ Amber = Attention. Open the administration
pages (see page 4) and check the router
status. The LED will show amber until the
user changes the default Administrator and
WiFi passwords. Default passwords must be
changed to secure the router.
Ethernet WAN: Indicates information about a
data source connected to the Ethernet WAN
port.
+ Blue = Connected to an active Ethernet WAN
interface.
WiFi Broadcast: These two LEDs indicate activity
on the WiFi broadcast for both the 2.4 GHz
and 5 GHz bands.
+ 2.4G (green) = 2.4 GHz WiFi is on and
operating normally.
+ 5G (blue) = 5 GHz WiFi is on and operating
normally.
Signal Strength: Blue LED bars indicate the
active modem's signal strength.
+ 4 Solid Bars = Strongest signal
+ 1 Blinking Bar = Weakest signal. (A blinking
bar indicates half of a bar.)
External USB Modem: Indicates the status of
external USB modem. All modems have the
following LED indicators:
+ Green = Modem has established an active
connection.
(continued on page 3)
©Cradlepoint. All Rights Reserved.
|
+1.855.813.3385
|
cradlepoint.com