Dell POWEREDGE 4300 Manuel d'installation - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dell POWEREDGE 4300. Dell POWEREDGE 4300 28 pages. System board upgrade
Également pour Dell POWEREDGE 4300 : Informations sur l'installation (6 pages), Installation du rack (37 pages), Manuel d'installation de la mise à niveau (14 pages), Installation du rack (34 pages), Manuel de mise à jour (23 pages), Manuel de mise à jour (24 pages), Manuel d'instructions d'installation (12 pages), Manuel de remplacement (3 pages), Informations sur l'installation (6 pages), Manuel d'installation (14 pages)

Imprimer la page
Dell POWEREDGE 4300 Manuel d'installation
1-14
Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide

Removing the Front Bezel

To remove the system front bezel, perform these steps:
1.
Remove the system cover (see Figure 1-12).

Figure 1-12. Removing the System Cover

a.
Turn the keylock on the back edge of the cover to the unlocked position.
b.
Slide the cover about a centimeter (half an inch) toward the back of the
system.
c.
Grasping the top of the cover at both ends, lift it away from the chassis.
2.
With your fingertips, gently pry loose the four tabs along the right edge of the
bezel, and disengage the three clips on the opposite edge from the chassis
(see Figure 1-13).
3.
Rotate the bezel to the left to disengage and remove it.
keylock
system cover