Dell POWEREDGE 4300 Manuel de mise à jour - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de mise à jour pour {nom_de_la_catégorie} Dell POWEREDGE 4300. Dell POWEREDGE 4300 23 pages. System board upgrade
Également pour Dell POWEREDGE 4300 : Informations sur l'installation (6 pages), Manuel d'installation (28 pages), Installation du rack (37 pages), Manuel d'installation de la mise à niveau (14 pages), Installation du rack (34 pages), Manuel de mise à jour (24 pages), Manuel d'instructions d'installation (12 pages), Manuel de remplacement (3 pages), Informations sur l'installation (6 pages), Manuel d'installation (14 pages)

support.dell.com

If you are installing a 600 MHz or greater microprocessor, replace the system

board mounting plate as follows.

Unlock and remove the front bezel.

Remove the right- and left-side computer covers.

Record the location and disconnect all external peripheral cables from their

connectors on the back of the computer.

Record the location of any internal expansion card cables, and then record

the slot number assignments and remove all the expansion cards.

Place the expansion cards in antistatic bags or on a grounded antistatic mat

or other antistatic surface.

Record the locations and disconnect all internal cables attached to the sys-

tem board.

At the left side of the system, locate and remove the three screws that

secure the system board and mounting plate to the chassis (see Figure 1-1).

mounting

screws (3)

system board and

mounting-plate assembly

Dell PowerEdge Systems — Microprocessor Upgrade

1-7