Dell PowerEdge 850 Manuel de l'utilisateur - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dell PowerEdge 850. Dell PowerEdge 850 23 pages. Information update - dell openmanage server support kit version 4.3
(.pdf)
Également pour Dell PowerEdge 850 : Mise à jour des informations de diagnostic du système (2 pages), Manuel d'installation (28 pages), Information Update (18 pages)
Imprimer la page
Option
Description
Console Redirection
Sets the console redirection feature to On or Off.
(On default)
Failsafe Baud Rate
Displays if the failsafe baud rate is used for console redirection.
(11520 default)
Remote Terminal Type
Select either VT 100/VT 220 or ANSI.
(VT 100/VT 220 default)
Redirection After Boot
Enables or disables console redirection after your system restarts.
(Enabled default)
System Security Screen
Table 2-6
lists the options and descriptions for the information fields that appear on the System Security screen.
Table 2-6. System Security Screen Options
Option
Description
System
Displays the current status of your system's password security feature and allows you to assign and verify a new system password.
Password
NOTE:
See
"Using the System
password.
Setup
Restricts access to the System Setup program in the same way that you restrict access to your system using the system password feature.
Password
NOTE:
See
"Using the Setup
Password
Setting the Setup Password option to Enabled prevents the system password from being changed or disabled at system start-up.
Status
To lock the system password, assign a setup password in the Setup Password option and then change the Password Status option to
Locked. In this state, you cannot change the system password using the System Password option and cannot be disabled at system start-
up by pressing <Ctrl><Enter>.
To unlock the system password, enter the setup password in the Setup Password field and then change the Password Status option to
Unlocked. In this state, you can disable the system password at system start-up by pressing <Ctrl><Enter> and then change the password
using the System Password option.
Power Button Turns system's power off and on.
If you turn off the system using the power button and the system is running an ACPI-compliant operating system, the system can
l
perform an orderly shutdown before power is turned off.
If the system is not running an ACPI-compliant operating system, power is turned off immediately after the power button is pressed.
l
The button is enabled in the System Setup program. When disabled, the button can only turn on system power.
NOTE:
You can still turn on the system by using the power button, even if the Power Button option is set to Disabled.
NMI Button
This filed enables/disables the NMI button on the front panel.
NOTICE:
Use the NMI button only if directed to do so by qualified support personnel or by the operating system's documentation. Pressing
this button halts the operating system and displays a diagnostic screen.
Sets the NMI feature On or Off.
AC Power
Determines how the system reacts when power is restored to the system. If system is set to Last, the system returns to the last power
Recovery
state. On turns on the system after power is restored. When set to Off, the system remains off after power is restored.
(Last default)
Exit Screen
After you press <Esc> to exit the System Setup program, the Exit screen displays the following options:
Save Changes and Exit
l
Discard Changes and Exit
l
Return to Setup
l
Password" for instructions on assigning a system password and using or changing an existing system
Password" for instructions on assigning a setup password and using or changing an existing setup password.