Dell PowerEdge 860 Manuel d'entretien - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Dell PowerEdge 860. Dell PowerEdge 860 37 pages. Sas/raid controller installation
Également pour Dell PowerEdge 860 : Information Update (14 pages), Manuel d'installation (28 pages), Manuel d'instructions d'installation (7 pages)
Imprimer la page
Display Bezel
Removing the Display Bezel
NOTICE:
The display bezel is extremely fragile. Be careful when removing it to prevent damaging the bezel.
1. Remove the display assembly (see Display).
2. Remove the four rubber bumpers from the top and mylar tapes from the bottom of the display bezel.
3. Remove the six screws on the display bezel.
4. Using your fingertips, carefully pry up the inside edge of the display bezel.
5. Remove the display bezel.
1
rubber bumper (4)
3
display bezel
Replacing the Display Bezel
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
1. Align the display bezel over the display panel, and gently snap into place.
2. Replace and tighten the six screws.
3. Replace the display assembly (see
Display Panel
2
screw (6)
4
display panel
Replacing the Display
Assembly).