DH Lifelabs Sciaire Pro Ceiling Manuel d'instruction - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} DH Lifelabs Sciaire Pro Ceiling. DH Lifelabs Sciaire Pro Ceiling 10 pages.

Imprimer la page

Attach the aircraft cable to the toggle bolts or hook screws.

NOTE: Please prepare aircraft cable for suspension mounting

in advance.

Bend each of the mounting clips on the back of the device

upward. Connect the mounting clips to the aircraft cables by

using S hooks. Adjust the aircraft cables to level the device.

NOTICE: The device must hang a minimum of 3 in. (76.2mm)

from the ceiling.

Make the electrical connections per page 7.

Restore power at the electrical panel.

Turn on the switch to activate the device.

Operation

NOTE: The Sciaire Pro Ceiling Light allows you to control disinfection part and lighting

part by two different wall switches.

Air Purification Operation

This device allows you to choose between two working modes by using your wall switch

and flipping it on/off/on within 5 seconds.

HIGH SPEED MODE:

- First time turn on the wall switch, the device will be running in high fan speed with

green indicator light.

SILENT MODE:

- Turn off the device in high fan speed by wall switch, and turn back on within 5 seconds

to active the silent mode, it will be running in low fan speed with blue indicator light.

- Turn off the device in silent mode by wall switch, and turn back on within 5 seconds,

the device will be running in high fan speed.

- Turn off the device in either mode by wall switch, and turn back on after 5 seconds, the

device will always be running in high fan speed per default setting.

NOTE: The default setting from the factory is high fan speed.

High Speed mode

Silent mode

Green light always on

Blue light always on

Lighting Operation

(Only available for Sciaire Pro Ceiling Light)

This device allows you to customize the color temperature of the light using four

settings from soft white to daylight.

• Choose your favorite correlated color temperature (CCT) from four options: 3000K

soft white, 3500K neutral white, 4000K cool white, or 5000K daylight.

• Move the toggle switch on the back side of the device to make your selection before

inserting the device into the ceiling.

NOTE: The factory setting for the correlated color temperature (CCT) is 3000K, which

is soft white.

• Choose the desired brightness (lumen output) from four options: 2480lm, 3070lm,

3680lm, 4153lm.

• Move the toggle switch on the back of the device to make your selection before

pushing the device into the ceiling.

NOTE: The factory setting for the brightness (lumen output) is 4153lm.

Indicators

High Speed mode

Silent mode

Green light always on

Blue light always on

HEPA filter replacment

Motor Error Alarm

Indicator

Blue light flashing

Red light flashing