Dell PowerEdge systems 6300 Manuel d'instructions d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Dell PowerEdge systems 6300. Dell PowerEdge systems 6300 12 pages. Systems 1 x 2 backplane
Également pour Dell PowerEdge systems 6300 : Informations sur l'installation (6 pages), Manuel d'installation (28 pages), Installation du rack (37 pages), Manuel de l'utilisateur (42 pages), Manuel d'installation (8 pages), Installation du rack (34 pages), Manuel de remplacement (3 pages), Informations sur l'installation (6 pages)

SMB Connector and SCSI Cable Strain-Relief Kit Installation Instructions

If your system supports the GSO-slot bracket, perform steps 4 and 5; otherwise,

go to step 6 for instructions on installing the PCI-slot bracket.

For GSO-slot brackets, locate the GSO slot on the system's back panel (at the

upper right-hand side as viewed from the back) and remove the tab for the slot.

From inside the chassis, orient the SMB connector as shown in Figure 1 (for

6300 systems) or Figure 2 (for 4300 systems) and insert it into the tab opening. On

the back panel, secure the SMB connector with the screws that came in the kit.

NOTE: Be sure not to over-tighten the screws.

SMB connector

(SDS_SMB)

system

board

SMB

connector

! "

GSO slot

SMB cable