Avue AU-G50Q-WB26 Manuel d'utilisation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Avue AU-G50Q-WB26. Avue AU-G50Q-WB26 17 pages. High-speed outdoor ptz camera series
Imprimer la pageOSD
Enter the OSD
The OSD menu can be activated by recall the preset position number 95
Press [SHOT] + [9] +[5] + [ENTER]
or
Press 2 x
In case your controller device has other key descriptions, please refer to the function "recall preset" ( instead of [Shot])
Navigation from keyboard:
device provide the keys:
[IRIS OPEN]
Enters the sub-menu or confirm
[IRIS CLOSE]
Cancel the current setting, or exit the selected menu item.
[UP], [DOWN]
Move between menu lines( menu item), or adjust the selected value when entered.
[RIGHT]
Enter a high-lighted menu item,
[LEFT]
exit the menu item, equals to [IRIS CLOSE]
Symbols:
→
"
"
: O
n the end of the line indicates a sub-menu.
: Shows current cursor.
Main Menu
MAIN MENU
------------------------------------
→
SYSTEM SETTING
→
CAMERA SETTING
→
FUNCTION SETTING
→
WINDOW BLANKING
→
ALARMS
→
LANGUAGE
EXIT
System Setting
SYSTEM SETTING
-------------------------------------
→
EDIT DOME LABEL
→
INITIAL INFO
→
DISPLAY SETUP
→
MOTION
→
CLEAR
→
PASSWORD SETTING
→
CLOCK SETTING
→
BACK
EXIT
System Setting
Edit dome label
EDIT DOME LABEL
►DOME1
LABEL:
BACK
EXIT
System Setting
Initial Info
INITIAL INFO
---------------------------------
S/N XXXXXXXXXXXXXXX
FIRMWARE
v1.10
PROTOCOL: VIDO B02
DOME ADRESS:
001
COMM, 9600, N8, 1
BACK
EXIT
[SHOT] + [9] + [ENTER]
To navigate through the OSD menu items, following keys are defined for OSD operation. Make sure your controller
SYSTEM SETTING: contains setting parameter for the system.
CAMERA SETTING: Camera / image related settings
FUNCTION SETTING: PTZ and auxiliary function settings
WINDOW BLANKING: Privacy masking function and settings
SYSTEM SETTING: contains setting parameter for the system.
CAMERA SETTING: Camera / image related settings
FUNCTION SETTING: PTZ and auxiliary function settings
WINDOW BLANKING: Privacy masking function and settings
- Select DOME LABEL and enter with [RIGHT] or [IRIS OPEN]
- The input character starts to flash, use [UP] or [DOWN] to select the desired character and [RIGHT] for next input.
- Available characters appear in following order:
- Use [LEFT] to move to previous character when edit.
- In case you need to delete a character, use the "SPACE"-character (Empty sign).
- When finished, press [IRIS OPEN] to save, or use [RIGHT] to move to last character and next to exit the editing mode.
- To dicard the setting, press [IRIS CLOSE] to exit.
- Select "BACK" to exit to "SYSEM SETTING" menu.
Initial Info show the following Info:
► Product Seriennumber
► Firmware version
► Protocol Setting
► Dome ID
► Baudrate
withing 3 seconds.
"0" to "9", "A" to "Z" , ":", "<", ">","-" "{SPACE}" (empty sign).
English
4