Dell PowerVault NX1950 Manuel d'installation et de dépannage - Page 27

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et de dépannage pour {nom_de_la_catégorie} Dell PowerVault NX1950. Dell PowerVault NX1950 48 pages. For vmware esx server software
Également pour Dell PowerVault NX1950 : Manuel de déploiement (34 pages), Informations importantes Manuel (26 pages), Pour commencer (49 pages), Manuel de déploiement (38 pages), Manuel de mise à jour (18 pages), Manuel de référence (4 pages), Mise en place (2 pages), Utilisation (2 pages), Manuel de configuration (11 pages)

Creating a Highly Available iSCSI Server Instance Using

Microsoft iSCSI Target 3.1

To create Targets and assign the .vhd files, the following steps need to be

performed:

Create Highly Available iSCSI Instance

1 Right-click the Microsoft iSCSI Software Target icon in the Microsoft

Management Console (MMC) and click Create high availability instance

for iSCSI.

2 Type the desired name into the field for Resource Group Name and click Add.

Fill out the rest of the required fields

–

IP Address

–

Subnet mask

–

Network Interface

3 Click OK twice.

The highly-available instance for iSCSI should be created successfully.

Create Target

Initiator Side

•

If you are not using iSNS server, go to the host/initiator to add the newly

created Target's iSCSI highly-available IP address in the Target portals for

connectivity.

•

Click Advanced and select the following options:

–

Local Adapter—Microsoft iSCSI Initiator

–

Source IP—Microsoft iSCSI Initiator

–

IP address of the client for iSCSI traffic

•

If you are using iSNS server, then right-click the iSCSI Target icon in

MMC, select Properties, go to iSNS tab and add iSNS IP address. Go to

initiator and add iSNS IP address in the Discovery tab.

Managing Your Cluster