Dell PowerVault NX1950 Manuel de configuration - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Dell PowerVault NX1950. Dell PowerVault NX1950 11 pages. For vmware esx server software
Également pour Dell PowerVault NX1950 : Manuel de déploiement (34 pages), Informations importantes Manuel (26 pages), Pour commencer (49 pages), Manuel d'installation et de dépannage (48 pages), Manuel de déploiement (38 pages), Manuel de mise à jour (18 pages), Manuel de référence (4 pages), Mise en place (2 pages), Utilisation (2 pages)

4. PowerVault NX1950 storage setup and configuration

For information on storage configuration on NX1950, refer to NX1950 Deployment Guide at

http://support.dell.com/support/edocs/stor-sys/pvnx1950/en/dg/dg_en.pdf

Select interface for storage requests: On the NX1950 server, open the Microsoft iSCSI

Software Target console and select the appropriate network to service storage requests.

1. Open the Microsoft iSCSI Target Software from Start->Administrative Tools->Microsoft

iSCSI Software Target

2. Right click on Microsoft iSCSI Software Target and click on Properties

3. Select the appropriate network interface to service storage requests.

Figure 2: Network selection to serve storage requests

Note: Teaming of network ports that serve iSCSI storage requests on the NX1950 target system

is not supported.

Dell Inc.