Dell VxRail E660 Manuel d'installation et d'entretien - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'entretien pour {nom_de_la_catégorie} Dell VxRail E660. Dell VxRail E660 32 pages.
Également pour Dell VxRail E660 : Manuel d'installation et d'entretien (32 pages)
Imprimer la page
Item
Ports, panels, or slots
11
OCP NIC port
12
NIC port (2)
13
BOSS S2 module
For more information, see the Dell VxRail™ E660, E660F, and E660N Technical Specifications.
10
System overview
Icon
N/A
N/A
Description
To reset iDRAC, press and hold the button for more than 16
seconds.
NOTE:
● To reset iDRAC using system ID, ensure that the
system ID button is enabled in the iDRAC setup.
● If the system stops responding during POST, press
and hold the system ID button (for more than 5
seconds) to enter the BIOS progress mode.
This port supports OCP 3.0. The NIC ports are integrated
on the OCP card which is connected to the system board.
The NIC ports are embedded on the LOM card that is
connected to the system board.
This slot supports the BOSS S2 module.