Dell 5397184567739 Manuel de démontage

Parcourez en ligne ou téléchargez le pdf Manuel de démontage pour {nom_de_la_catégorie} Dell 5397184567739. Dell 5397184567739 5 pages.

1. Disassembly Procedures:

Open the carton with a proper tool.

Take out all accessories including label(optinal), QSG,

Delta-E paper, DP cable, USB C to C cable(Type-C

cable), USB A to C cable(USB cable), power cable,

manual from the carton. (Note: It depends on whether

users returning the accessories)

power cable

DP cable

USB C to C cable

USB A to C cable

Take out the paper top with base from the carton,

then take out the monitor and stand from the carton.

Take out the monitor from EPE-bag and put the LCD

monitor on a protective cushion.

QSG

Delta_E paper

manual

base

stand

monitor

Use a Philips-head screwdriver to remove 4pcs

screws for unlocking mechanisms. Remove DP caps.

(No.1~4 screw size=M4x11; Torque=11

Tear off the screen protector, then wedge fingers

between rear cover and the middle bezel on the

corners of the top side of the monitor to release the

rear cover, then use one hand to press the middle

bezel, the other hand to pull up the rear cover in order

of arrow preference for unlocking the rear cover.

Lift the rear cover up carefully. Disconnect the

joystick key cable from the connector of the interface

board, and then remove the rear cover and put it

aside for later disassembling.

Use a Philips-head screwdriver to remove 2pcs

screw for unlocking the key board, then tear off the

tapes and release the key board.

(No.1~2 screw size=M2x2.4, Torque=0.8~1kgfxcm)

DELL U3223QE

1kgfxcm)