Dell C3422WE Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Dell C3422WE. Dell C3422WE 21 pages. Curved display manager
Également pour Dell C3422WE : Manuel (6 pages), Manuel de l'utilisateur (20 pages)

Imprimer la page

Necessary repair and test equipment:

1. Philips-head screwdriver

4.1 Disassembly Procedures:

Remove the monitor stand base:

1. Place the monitor on a soft cloth or cushion.

2. Press and hold the stand-release button.

3. Lift the stand up and away from the monitor.

Use a Philips-head screwdriver to remove 4pcs

screws for unlocking mechanisms. Remove DP cap.

(No.1~4 screw size=M4x11; Torque=11

Wedge your fingers between rear cover and the

middle bezel on the corners of the top side of the

monitor to release the rear cover, then use one hand

to press the middle bezel, the other hand to pull up

carefully the rear cover in order of arrow preference

for unlocking mechanisms of rear cover.

4. Disassembly and Assembly Procedures

1kgfxcm)

Lift the rear cover up carefully. Disconnect the

joystick key cable and two USB cables from the

connectors of the board, and then remove the rear

cover and put it aside for later disassembling.

Use a Philips-head screwdriver to remove 1pcs screw

for unlocking the USB board, then tear off all the tapes

and release the Usb power cable and joystick cable.

(No.1 screw size=M3x6, Torque=4

Use a Philips-head screwdriver to remove 2pcs

screws for unlocking the joystick board, then release

the Joystick board from the hook of the rear cover.

(No.1~2 screw size=M2x2.4, Torque=0.8~1kgfxcm)

0.5kgfxcm)