ensto LISTA7-BT Manuel d'installation et d'utilisation - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} ensto LISTA7-BT. ensto LISTA7-BT 20 pages.
TASO, LISTA, PETA and ROTI Heaters
ENG
Safety Instructions
•
The heaters may only be installed by electrically skilled person.
•
The power supply must be disconnected before carrying out any installation or maintenance work on
this heater.
•
The instruction manual must be stored in a safe location and be available for future installation and
service.
•
People who are not able to operate according to the manual must not use this appliance.
•
CAUTION – Some parts of this heater can become very hot and cause burns. Particular attention has
to be where children and vulnerable people are present.
•
Children of less than 3 years should be kept away unless continuously supervised.
•
Children aged from 3 years and less than 8 years shall only switch on / off the heater provided that
it has been placed or installed in its intended normal operating position and they have been given
supervision or instruction concerning the use of the heater in a safe way and understand the hazards
involved. They shall not plug in, regulate and clean the heater or perform user maintenance.
•
If the supply cord is damaged, it must be replaced by the manufacturer or electrically skilled person.
Product Information
•
The heaters are intended for permanent installation on the wall rack included in the package.
•
The heaters are double-insulated, class II, separate earthing is not required.
•
The heaters are equipped with an electronic thermostat.
•
The auxiliary energy consumption is 0,5W.
•
All the heaters are fitted with overheating protection. In the PETA heater the overheating protection
can be reset manually (red button). In other types the overheating protection resets automatically.
•
In cramped quarters and locations in which the heater may be covered up accidentally, a PETA heater
must be used.
•
The splashproof ROTI heater is not recommended for installation in places in which it can be subjected
to a heavy jet of water. When the ROTI heater is installed in a bathroom, the switch and other controls
must not be within the bather's reach.
Commissioning the Heater
Use the power switch (A) to switch the heater on (position I) and off (position 0), figure 3.1.
•
•
Adjust the desired temperature with the adjustment knob (C).
User Instructions for Ensto Heat Control Application
With this application you can program and change the settings of your heater. Bluetooth technology is
used for the wireless connection. You can connect to one device at a time. The range in free space is ap-
proximately 5m.
Commissioning
•
Download the Ensto Heat Control application from Apple Store or Google Play, figure 5.1.
•
Open the application. In "DEMO" mode you can practice using the application. The Tutorial video
shows application's features and guides you through the commissioning. At any time, you can go back
to the Tutorial through the "Support" menu.
•
After the Tutorial, pair your mobile device with your heater, figure 5.2.
»
Switch on the heater with the power switch A.
»
Press the Bluetooth button B on the heater for 1 second.
»
The blue LED indicator E blinks.
When the application has found your heater, you can see the default name "New heater" on your
»
mobile display.
Press the "New heater" button within 45 seconds.
»
»
The blue LED indicator E turns off, when the pairing is completed or 45 seconds is exceeded.
Now you can find your heater in "Devices / My devices".
•
14
RAK120 / © Ensto 2018