Allied Telesis Rapier AR 700 Series Comment faire - Page 2
Parcourez en ligne ou téléchargez le pdf Comment faire pour {nom_de_la_catégorie} Allied Telesis Rapier AR 700 Series. Allied Telesis Rapier AR 700 Series 8 pages. How to set up pppoe between a linux client and access concentrator
Également pour Allied Telesis Rapier AR 700 Series : Comment configurer (6 pages), Manuel de dépannage (8 pages), Dépannage (5 pages), Manuel d'installation rapide (13 pages)
Imprimer la page
Configuring your Allied Telesis Device
Before starting, ensure that your PC has a version of rp-pppoe.
If rp-pppoe isn't on your PC, do one of the following;
•
Download it from
compile and install it.
•
Use the prepackaged installer, for example RPM or deb.
!
add user=linux_client pass=password
set user=linux_client telnet=no ipaddr=192.168.0.1
#
# PPP templates configuration
#
create ppp template=1
set ppp template=1 bap=off authentication=chap
#
# PPP configuration
#
add ppp acservice=test template=1 vlan=1
ena ppp accessconcentrator
#
# IP configuration
#
enable ip
add ip int=vlan1 ip=192.168.0.254
Network diagram
Linux PC (client)
Set Up PPPoE Between a Linux Client and an Allied Telesis Access Concentrator
http://www.roaringpenguin.com/penguin/open_source_rp-pppoe.php
Configure your Allied Telesis device as follows:
netmask=255.255.255.255
eth 1
port 1
Allied Telesis switch
(Access Concentrator)
, then
2