Dell UltraSharp 2208WFP Manuel de l'utilisateur - Page 19
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dell UltraSharp 2208WFP. Dell UltraSharp 2208WFP 31 pages. Aio flat panel monitor for dell optiplex sff computer
Également pour Dell UltraSharp 2208WFP : Manuel de configuration (2 pages), Manuel (41 pages)
Imprimer la page
Exit Menu
Push
OSD Warning Messagess
One of the following warning messages may appear on the screen indicating that the monitor is out of synchronization.
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See
Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1680 X 1050.
You will see the following message before the DDC/CI function is disabled.
When monitor enters Power Save mode, the following message appears :
Activate the computer and wake up the monitor to gain access to the
If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below
appears.
See
Solving Problems
for more information.
Setting the Optimal Resolution
To set the optimal resolution for the monitor:
1. Right-click on the desktop and select Properties.
2. Select the Settings tab.
3. Set the screen resolution to 1680 x 1050.
4. Click OK.
If you do not see 1680 x 1050 as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following
procedures:
If you have a Dell desktop or portable computer:
l
Go to support.dell.com, enter your service tag, and download the latest driver for your graphics card.
¡
If you are using a non-Dell computer (portable or desktop):
l
Go to the support site for your computer and download the latest graphic drivers.
¡
Go to your graphics card website and download the latest graphic drivers.
¡
Using the Dell Soundbar (Optional)
The Dell Soundbar is a stereo two channel system adaptable to mount on Dell Flat Panel Displays. The Soundbar has a rotary volume and on/off control to
adjust the overall system level, a blue LED for power indication, and two audio headset jacks.
to exit the OSD main menu.
or
or
or
OSD
Monitor Specifications
for the