Dell Dell PowerVault MD32X0i Manuel de mise en œuvre - Page 18

Parcourez en ligne ou téléchargez le pdf Manuel de mise en œuvre pour {nom_de_la_catégorie} Dell Dell PowerVault MD32X0i. Dell Dell PowerVault MD32X0i 33 pages. Storage arrays

Imprimer la page

PowerVault™ MD32X0, MD32X0i, and MD36X0i Series of Storage Arrays: Implementing Hyper-V

Settings for New Physical Disks

Figure 8.

Your VM is ready to use. Now, you can install the operating system. If you need to attach more VHDs,

repeat the previous procedure.

Setting Up VMs with Pass-through Devices

This section describes how to set up VMs with pass-through devices. You can add a pass-through device

to an existing VM or create a new VM using pass-through devices only.

Adding a Pass-through Device to an Existing VM

1. Create virtual disks for recently defined VMs on the MD32X0, MD32X0i, or MD36X0i

storage array.

2. Map the virtual disk to the VM.

In the example, the VM1PASSTHROUGH virtual disk is mapped to the Windows2003

VM.

3. View these disks in the Windows Disk Management window to make sure that they are

in the Offline state.

Page 16