Dell PowerEdge SC420 Manuel de démarrage - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Dell PowerEdge SC420. Dell PowerEdge SC420 7 pages. Expansion enclosure
Également pour Dell PowerEdge SC420 : Manuel de remplacement (14 pages), Manuel du propriétaire (26 pages), Information Update (21 pages), Manuel du propriétaire (21 pages)
Imprimer la page
Connecting the Power Cables
Connect the power cables to the expansion enclosure.
1.
Before connecting the power cables, make sure that the power switches on the expansion enclosure are in the OFF position.
2.
Connect the power cables to the power supplies in the expansion enclosure chassis.
Figure 4. Power Cables
3.
Secure each power cable to the expansion enclosure chassis using the strain relief fasteners.
4.
Plug the other end of the power cables into a grounded electrical outlet or a separate power source such as an uninterrupted
power supply (UPS) or a power distribution unit (PDU).
NOM Information (Mexico Only)
The following information is provided on the device described in this document in compliance with the requirements of the official
Mexican standards (NOM):
Importer
Model number
Supply voltage
Frequency
Current consumption
Technical Specifications
The technical specifications of the SC400 series expansion enclosures are displayed in the following tables.
Drives
SAS hard drives
Dell Inc. de México, S.A. de C.V
Paseo de la Reforma 2620-11 ° Piso
Col. Lomas Atlas
11950 México, D.F.
E03J and E04J
100–240 VAC
50/60 Hz
8.6–4.3 A
SC400: Up to 12 hot-swappable 3.5-inch 12 Gbps SAS hard drives or SAS solid state drives
(SSDs)
SC420: Up to 24 hot-swappable 2.5-inch 12 Gbps SAS hard drives or SAS solid state drives
(SSDs)
SC420F: Up to 24 hot-swappable 2.5-inch 12 Gbps SAS solid state drives (SSDs)
NOTE: SC400 series expansion enclosures support self-encrypting drives (SEDs).
5