Dell PowerVault 110T DLT1 Manuel de l'utilisateur - Page 21
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dell PowerVault 110T DLT1. Dell PowerVault 110T DLT1 39 pages. Dell powervault 110t dlt vs160 tape drive - user's guide
Également pour Dell PowerVault 110T DLT1 : Manuel de l'utilisateur (23 pages), Manuel (15 pages), Manuel (47 pages)
Imprimer la page
Using the Tape Drive: Dell PowerVault 110T DLT VS160 Tape Drive User's Guide
data.
Table 3. Unload/Eject button features
LED Status
Ready
Fault
Clean
On
N/A
N/A
Blinking
Off
Blinking Blinking Blinking
Blinking Blinking Blinking Blinking
On
Off
On
On
On
On
On
On
Off
Off
Unload/Eject Button Feature Description
Normal Unload/Eject
When you release the button, the drive unloads and ejects the cartridge.
Write/Read Diagnostic Mode
NOTICE: This mode overwrites all data on the cartridge in the drive. Use extreme caution when using this
feature to avoid loss of important data.
When you release the button, the drive initiates an internal write/read diagnostic. The diagnostic requires that you first load a
cartridge that is blank or does not contain valuable data. When the diagnostic begins, the drive writes and then reads approximately
400MB of data and then unloads and ejects the cartridge. The process takes about two minutes. If the diagnostic test detects no
errors, the drive returns to normal operating mode. If an error occurs, the appropriate LEDs illuminate.
Emergency Reset
When you release the button, the drive performs a hard reset, behaving as if it had been turned off and then on. A standard POST
then takes place.
Revert to Normal Operating Mode
When you release the button, the drive returns to normal operation.
Loading a Tape Cartridge
The PowerVault 110T DLT VS160 Tape drive reads and writes DLTtape VS1 cartridges. The PowerVault 110T DLT VS160 Tape
drive can read - but not write - DLTtape™ IV cartridges written using the DLT1/VS80 format.
NOTE: The PowerVault 110T DLT VS160 Tape drive automatically ejects any other cartridge types and any cartridges
whose format it cannot read. Make sure all cartridges that you want to use for writing are DLTtape VS1 cartridges.
Loading a cartridge into the PowerVault 110T DLT VS160 Tape drive is fast and easy. After the drive completes POST, insert the
file:///C|/Users/rishi_sood/Desktop/Temp/MissingDocsPosted/110t_dlt/UG/usage.htm[3/8/2013 11:46:13 AM]
Button Hold
Time (seconds)
Media
N/A
0-6
Off
Off
6-9
Off
12-15
15-18
Off
Off
18-21
Off
Off
21-24
On
Off
24-27
On
On
27-30
Off
Off
30+
Feature Description
Normal unload/eject function
Reserved
Reserved
Reserved
Revert to normal operating mode
Write/read diagnostic mode*
Reserved*
Emergency reset
Revert to normal operating mode