Dell PowerVault 735N Manuel d'instructions de remplacement - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de remplacement pour {nom_de_la_catégorie} Dell PowerVault 735N. Dell PowerVault 735N 19 pages. Nas appliances. boot hard-disk drive
Également pour Dell PowerVault 735N : Manuel d'installation (26 pages), Manuel complémentaire (3 pages), Manuel de remplacement du matériel (10 pages), Manuel de mise à jour (10 pages), Manuel (18 pages), Manuel de mise à jour (12 pages), Manuel de mise à jour (8 pages)

Imprimer la page
Dell PowerVault 735N Manuel d'instructions de remplacement
support.dell.com
5.
If your replacement hard-disk drive is already installed in a drive carrier, skip to
step 2 of the procedure, "Hard-Disk Drive Replacement."
6.
If the replacement hard-disk drive has no drive carrier, you must remove the
faulty hard-disk drive from its drive carrier by performing the following steps:
a.
Remove the four screws that secure the drive to the drive carrier
(see Figure 1-3).
b.
Remove the hard-disk drive from the drive carrier.
screws (4)
Figure 1-3. Removing the Hard-Disk Drive From its Drive Carrier

Hard-Disk Drive Replacement

To install a replacement hard-disk drive, perform the following steps.
NOTE: If your replacement hard-disk drive is already installed in a carrier, start
at step 2.
1.
Install the replacement hard-disk drive into the drive carrier and secure it with the
four screws you removed in step 6 of the previous procedure.
2.
Open the handle on the drive carrier and slide the replacement hard-disk drive
and drive carrier into its slot. Close the handle until it engages the front panel,
locking the drive in place.
3.
Reinstall the hard-disk drive lock you removed in step 3 of the previous
procedure.
4.
If you removed the front bezel in step 2 of the previous procedure, reinstall
it now.
Dell PowerVault NAS Appliances Boot Hard-Disk Replacement
hard-disk drive
hard-disk drive carrier
1-3