Dell PowerVault LTO4-120 Manuel de l'utilisateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dell PowerVault LTO4-120. Dell PowerVault LTO4-120 26 pages. Powervault tape systems
Également pour Dell PowerVault LTO4-120 : Manuel de démarrage (33 pages), Manuel (28 pages), Manuel de l'utilisateur (44 pages)
Back to Contents Page
Installing the LTO Driver Software
Dell™ PowerVault™ LTO-4-120 Tape Drive User's Guide
This chapter explains how to install the LTO driver software.
If you intend to use the PowerVault LTO-4-120 Half-Height tape drive with the Microsoft
install the appropriate version of the LTO driver software.
The driver software is located on the Dell PowerVault Documentation and Drivers CD. However, drivers are often updated, and a more recent version may be
available. Please check
http://www.dell.com/
To install the LTO drivers from the Dell PowerVault Documentation and Drivers CD:
1. Ensure that you are logged on to the host server with administrator privileges.
2. Insert the Dell PowerVault Documentation and Drivers CD into the CD drive on the host computer.
3. Open the device manager (refer to your specific OS documentation for instructions). For example, right-click the My Computer icon on the Windows
desktop, click Properties, and then click Device Manager. You can also go to the Control Panel and access System. Click Hardware and then Device
Manager.
The LTO-4-120 drive should be listed under the ? Other Devices item as QUANTUM ULTRIUM 4 Sequential Device.
4. Right-click the QUANTUM ULTRIUM 4 Sequential Device listing and click Properties.
5. Select the Driver tab.
6. Click Update Driver.
7. When the Upgrade Device Driver Wizard appears, click Next.
8. Click Display a list... and then click Next.
9. Scroll down and click Tape Drive, and then click Next.
10. Click Have Disk, type D:\i386 or D:\amd64, replacing D: with the drive letter for the CD drive into which you inserted the Dell PowerVault Documentation
and Drivers CD, and then click OK.
11. Click the Quantum LTO 4 Tape Drive entry, and then click Next.
12. Click Next to install the driver.
13. Click Finish.
14. Click the Device Properties dialog box.
The drive now appears in Device Manager under Tape Drives as a Quantum LTO 4 Tape Drive and is ready to use.
Back to Contents Page
for the most up-to-date drivers.
Get other manuals https://www.bkmanuals.com
®
native backup applet on a Windows Server
®
2003 operating system,