Dell PowerVault MD3000i Manuel de l'utilisateur - Page 19
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dell PowerVault MD3000i. Dell PowerVault MD3000i 46 pages. Configuration for vmware esx server software
Également pour Dell PowerVault MD3000i : Manuel d'accord (32 pages), Note de soutien (22 pages), Manuel de mise à jour (28 pages), Manuel de remplacement (4 pages), Manuel de configuration (10 pages)
Imprimer la page
Networking Configuration for Software iSCSI
Storage
Networking configuration for software iSCSI involves creating an iSCSI
VMkernel port and mapping it to a physical NIC that handles iSCSI traffic.
Depending on the number of physical NICs you use for iSCSI traffic, the
networking setup can be different:
•
If you have one physical NIC, create one VMkernel port on a vSwitch and
map the port to the NIC. VMware recommends that you designate a
separate network adapter entirely for iSCSI. No additional network
configuration steps are required.
•
If you have two or more physical NICs for iSCSI, you can create multiple
paths for the software iSCSI by using the port binding technique.
With port binding, you create a separate VMkernel port for each physical NIC
using 1:1 mapping. You can add all network adapter and VMkernel port pairs
to a single vSwitch, as shown in Figure 11.
Figure 11. Port Binding Single vSwitch
Another alternative is to create a separate vSwitch for each network adapter
and VMkernel port pair, as shown in Figure 12.
Dell MD Storage Array vCenter Plug-in
19