Dell PowerVault MD3200 Series Manuel de déploiement - Page 29

Parcourez en ligne ou téléchargez le pdf Manuel de déploiement pour {nom_de_la_catégorie} Dell PowerVault MD3200 Series. Dell PowerVault MD3200 Series 38 pages. Storage arrays
Également pour Dell PowerVault MD3200 Series : Manuel de mise à jour (32 pages), Instructions pour l'installation du rack (2 pages), Matrice de soutien (12 pages), Manuel d'installation (18 pages), Information Update (1 pages), Matrice de soutien (17 pages), Manuel technique (40 pages), Livre blanc (22 pages), Manuel de déploiement (38 pages), Manuel de déploiement (38 pages)

Dell PowerVault MD3200 Series Manuel de déploiement

Post Installation Tasks

Before using the PowerVault™ MD3200 Series storage array for the first time,
complete a number of initial configuration tasks in the order shown. These
tasks are performed using the MD Storage Manager (MDSM) software.
1 For out-of-band management, you must set the network configuration for
each RAID controller module, including its Internet Protocol (IP) address,
subnetwork mask (subnet mask), and gateway.
NOTE:
You can set the network configuration using a DHCP server.
2 Start MDSM.
On Microsoft
ProgramsDellMD Storage ManagerModular Disk Storage
Manager Client.
On Linux operating systems, click the MD Storage Manager desktop
icon. You can also launch MD Storage Manager in Linux by running
the following commands at the command prompt:
cd
/opt/dell/mdstoragesoftware/mdstoragemanager/c
lient
./SMclient
3 In the Enterprise Management Window (EMW), go to Setup Add
Storage Array and start the automatic discovery of systems.
NOTE:
Only storage arrays configured with IP address on the same subnet as
the management stations will be detected.
NOTE:
It may take several minutes for the discovery process to complete.
Closing the Automatic Discovery Status window before this stops the
discovery process.
After discovery is complete, a confirmation screen appears. Click Close to
close the screen.
®
®
Windows
operating systems, click Start
Post Installation Tasks
4
29