Dell PowerVault MD3200 Series Manuel de déploiement - Page 36

Parcourez en ligne ou téléchargez le pdf Manuel de déploiement pour {nom_de_la_catégorie} Dell PowerVault MD3200 Series. Dell PowerVault MD3200 Series 38 pages. Storage arrays
Également pour Dell PowerVault MD3200 Series : Manuel de mise à jour (32 pages), Instructions pour l'installation du rack (2 pages), Matrice de soutien (12 pages), Manuel d'installation (18 pages), Manuel de déploiement (38 pages), Information Update (1 pages), Matrice de soutien (17 pages), Manuel technique (40 pages), Livre blanc (22 pages), Manuel de déploiement (38 pages)

Imprimer la page
Dell PowerVault MD3200 Series Manuel de déploiement
The least queue depth with subset policy treats large block requests and small
block requests equally. The data path selected is in the path group of the
RAID controller module that owns the virtual disk.

Changing Load Balance Policies in Windows Sever 2008

Load balancing with the PowerVault MD3200 Series is only available for
Windows Server 2008 and later versions of the operating system. You can
change the load balance policies from the default round robin with subset by
using one of the following:
•
Device Manager options
•
Disk Management options
Changing the Load Balance Policy Using Windows Server 2008 Device
Manager Options
1 From the host desktop, right-click My Computer and select Manage to
open the Computer Management window.
2 Click Device Manager to show the list of devices attached to the host.
3 Right-click the multi-path disk device for which you want to set load
balance policies, then select Properties.
4 From the MPIO tab, select the load balance policy you want to set for this
disk device.
Changing the Load Balance Policy Using the Windows Server 2008 Disk
Management Options
1 From the host desktop, right-click My Computer and select Manage to
open the Computer Management window.
2 Click Disk Management to show the list of virtual disks attached to
the host.
3 Right-click the virtual disk on which you want to set the load balance
policy, then click Properties.
4 From the MPIO tab, select the load balance policy that you want to set for
this virtual disk.
36
Downloaded from
www.Manualslib.com
Appendix—Load Balancing
manuals search engine