Dell PowerVault MD3220i Series Manuel d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dell PowerVault MD3220i Series. Dell PowerVault MD3220i Series 18 pages. Storage arrays
Également pour Dell PowerVault MD3220i Series : Manuel de déploiement (41 pages), Manuel de mise à jour (32 pages), Instructions pour l'installation du rack (2 pages), Information Update (1 pages), Manuel technique (38 pages), Manuel (16 pages)

Installing and Uninstalling the SMI-S

Provider

The system requirements to install and run the SMI-S Provider include:

•

Memory requirements—1 GB minimum (2 GB preferred).

•

Connectivity requirements—Ethernet with 100BASE-T minimum

(Gigabit Ethernet preferred), TCP/IP.

•

Port requirements—TCP port 5988 or TCP port 5989, or any other

available port if these ports are not available.

•

Storage array password—The device credentials profile requires the storage

array password (SharedSecret) to modify operations. The SMI-S Provider

persistently tracks an instance of the SharedSecret per storage array.

The SMI-S Provider is packaged as an installation executable file. To install

the SMI-S Provider:

1 Move the SMI-S Provider installation executable file on the server where

you want to install the SMI-S Provider and double-click the installation

executable icon and follow the instructions on the screen.

During installation, ArrayHosts.txt file opens.

2 Enter the HostName (s) or IP Address (s) of the MD storage array(s) to be

managed by the host in ArrayHosts.txt, save and close the file.

CAUTION:

Enter only one of the two management ports' IP addresses of each

array in this file. Do not enter the IP addresses of both management ports.

3 Click Finish.

The SMI-S Provider is installed on your system. After installation, you can

delete the installation executable file.