3 Day Blinds Cornice Box Manuel d'instructions d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} 3 Day Blinds Cornice Box. 3 Day Blinds Cornice Box 2 pages.

Imprimer la page

• Using the mark on the wall as your guide, place the top of

each mounting bracket

be equidistant from one another throughout the width of the

window opening. Ensure each bracket is aligned and level

and mark the wall through the hole in each bracket.

Mounting Bracket A

• Using a drill with a

" drill bit or an awl make a small pilot

hole at each pencil mark. Mount each bracket using two of

the screws provided.

Mounting Bracket A

• Set the cornice on top of the mounting brackets in the desired

mounting position. Mark the underside of the dust cover

through the bottom of each bracket.

Mounting Bracket A

• Remove the dust cover and use a

through the dust cover at each pencil mark.

" below the line. Brackets should

Mounting Bracket b

" drill bit to drill a hole

• Set the cornice back on top of the mounting brackets so

the holes through the dust cover are positioned over each

bracket. Insert a

" bolt through the bracket and tighten it

down with the wing nuts provided.

Mounting Bracket A

clEANING AND cARE

Caring for your wood Cornice Box is very easy. Periodic

vacuuming with a soft brush attachment is suggested. To dust

the Cornice Box, use a lamb's wool duster or a soft clean cloth

to avoid scratching the finish. DO NOT sponge clean or use

abrasive household cleansers. Corrosive chemicals may stain

or damage the Cornice Box.

800-800-3329 | 3dayblinds.com

Mounting Bracket b