Dell PowerVault NX1950 Informations importantes Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Informations importantes Manuel pour {nom_de_la_catégorie} Dell PowerVault NX1950. Dell PowerVault NX1950 26 pages. For vmware esx server software
Également pour Dell PowerVault NX1950 : Manuel de déploiement (34 pages), Pour commencer (49 pages), Manuel d'installation et de dépannage (48 pages), Manuel de déploiement (38 pages), Manuel de mise à jour (18 pages), Manuel de référence (4 pages), Mise en place (2 pages), Utilisation (2 pages), Manuel de configuration (11 pages)

•

Displays Unspecified user error message when a user with no

administrator privileges starts/stops the network file system (NFS).

When a user tries to start or stop the User Name Mapping/Client for

NFS/Server for NFS service from the Microsoft Service for NFS, the

following error message is displayed:

Unspecified user

This issue is behaving as designed because the user is trying to perform

an operation that requires administrator privileges.

•

iSCSI target allows multiple initiators to access a single virtual disk.

If the same virtual disk is added to different targets or a target with

multiple clients from the initiator machine, the user can overwrite the

data that belongs to other users. The addition of a new file or a folder

will not be transparent unless the user restarts the initiator service.

This issue results in loss of data as the user on one initiator will be

overwriting data that belongs to other users.

•

Multiple attempts to configure the array reports the array type as

Unknown in a storage array setup.

While running the Dell Storage Initialization wizard during the initial

configuration, multiple attempts to the initial wizard in the Array log

in page reports the array type as Unknown and is behaving as

designed. It is not possible to read the array type unless the privileged

user list on the array is empty or if the privileged user list is manually

set up.

To work around this issue, configure the array completely using the

Dell Storage Initialization wizard at least once.

•

Uninstalling and reinstalling File Server Resource Manager (FSRM)

shows two snap-ins in the PowerVault NX1950 console.

One snap-in is displayed under Share and Storage Management and

the other snap-in is displayed under PowerVault NX1950

Management. This is a known issue.

Important Information